Avro,s finest

Anything that flies goes here : fixed wings, rotary wing, airships and ..... balloons
Post Reply
MalcolmR
Posts: 103
Joined: Sat Oct 24, 2020 9:21 am

Avro,s finest

Post by MalcolmR »

Well almost Avro,s finest.
After building the AModels Lancaster

I decided to build a Lincoln using the AModels kit as a base. After extending the fuselage and casting a new nose and tail turret in clear resin. I extended the kits wings and made the engines from different sized plastic tube.

I next made the Avro York. I used the Welsh Models fuselage and tail planes but used the AModels Lancaster wings.

With the AModels fuselage spare I next used the Welsh Models wing and built new engines to build an Avro Manchester.

I the thought let's convert the AModels Lancaster to a Lancaster B.II. I obtained a Mark 1 Beaufighter and cast copies of the engines and made new propellers.
Avro,s finest 055 (22).JPG
<
The Shackleton and Vulcan were kits I had made earlier but it does make a nice line up. Hope you like them.
Attachments
1-144 AVRO LINCOLN 23-11-2020 048 (7).jpg
<

MalcolmR
Posts: 103
Joined: Sat Oct 24, 2020 9:21 am

Re: Avro,s finest

Post by MalcolmR »

Some additional photos
Avro,s finest 055 (19).JPG
<
1-144 Avro Lancaster B.II  (AModels) Conversoin (12).JPG
<
Attachments
1-144 Avro York 007  (2).JPG
<

User avatar
DH106
Posts: 79
Joined: Wed Sep 30, 2020 4:47 pm

Re: Avro,s finest

Post by DH106 »

That's a beautiful Lincoln. The Avro line up by the hangar reminds me of my Dad's story of seeing Lancasters emerge from the camouflaged factory at Yeadon in about 1943. You can still see the building by the Leeds/Bradford airport.

User avatar
teddybeer
Posts: 247
Joined: Fri Sep 25, 2020 5:33 pm

Re: Avro,s finest

Post by teddybeer »

The Avro factory is finally reopened !
The family is reunited, from Manchester to Shackelton : Bravo ....!!!

MikeV
Posts: 300
Joined: Sun Sep 27, 2020 4:02 pm

Re: Avro,s finest

Post by MikeV »

What a line-up - The AModel Lancaster is no easy starting point - I was going to suggest the labours of Hercules but that might be a pun too far !

For what it's worth it was the Czechmaster Shackletons that sold me on the merits of 1/144 all those years ago. The last two Lincolns were sacrificed on Manston's fire training ground when I was a cadet so harrumph years ago, what a shame. About four phase three Shacks went the same way (the extra jet engine knackered the mainspars)

As ever Malcolm a superb job, thanks for sharing.

MalcolmR
Posts: 103
Joined: Sat Oct 24, 2020 9:21 am

Re: Avro,s finest

Post by MalcolmR »

Thanks for the compliments. You're right about the AModels Lancaster being fiddly. The bomb bay has always been a challenge to get right but I will never attempt fitting the brass detail set. I wonder if anyone has ever managed to complete it. On the Lancaster B.II I built the bulged bomb bay

MikeV
Posts: 300
Joined: Sun Sep 27, 2020 4:02 pm

Re: Avro,s finest

Post by MikeV »

I confess - I did build it - but it nearly drove me mad and at the time there wasn't a resin alternative !
There's challenging and then there's masochism
<
There's challenging and then there's masochism

MalcolmR
Posts: 103
Joined: Sat Oct 24, 2020 9:21 am

Re: Avro,s finest

Post by MalcolmR »

As my carpet monster is already overfed and I now need a magnifier to see for my shaky hands I congratulate you on you skill and nerve.

Stick & Strings Joe
Posts: 50
Joined: Sat Oct 24, 2020 9:18 am

Re: Avro,s finest

Post by Stick & Strings Joe »

Great collection

Post Reply